How to Make a Nose Hoop Fit Snugly: Tips & Guidelines

Introduction

A nose hoop is a popular type of body jewelry worn in the nostril. It’s typically made from stainless steel, gold, or titanium, and comes in various sizes. If you’ve recently gotten a nose piercing and want to make sure your hoop fits as snugly as possible, there are some steps you can take to ensure a comfortable fit.

Purchase the Appropriate Size Hoop

The first step to making sure your nose hoop fits snugly is to purchase the right size. To determine the correct size for your nose piercing, it’s important to measure your piercing accurately. Use a flexible measuring tape or a ruler to measure the diameter of your piercing. The measurement should be taken from the outside edge of one side of the piercing to the outside edge of the other side.

Once you have the measurements, you can determine the appropriate size hoop for your nose. Generally speaking, most nose hoops come in sizes ranging from 8mm to 12mm. If your piercing is on the smaller side, an 8mm or 10mm hoop might be the best option. If your piercing is larger, then a 10mm or 12mm hoop might be better suited.

Clean the Piercing Site Properly

Before inserting your nose hoop, it’s important to make sure the piercing site is clean. Start by washing your hands with soap and water for at least 20 seconds. Once your hands are clean, use an antiseptic solution such as rubbing alcohol or saline solution to clean the area around the piercing. Allow the solution to sit on the skin for a few minutes before wiping it away with a lint-free cloth.

Insert the Hoop Slowly

Once the piercing site is clean and dry, you can insert the hoop. Start by gently pushing the hoop through the piercing. Take your time and don’t rush the process. You may need to twist the hoop slightly to get it completely through the piercing. Once the hoop is in place, make sure it’s sitting comfortably and securely in your nose.

Warm the Hoop Before Insertion

If you find that the hoop isn’t fitting quite as snugly as you’d like, you may want to try warming it before insertion. This can help the metal become more malleable and easier to push through the piercing. To warm the hoop, hold it in your hand for a few minutes or submerge it in hot (but not boiling) water for a few seconds. Be sure to test the temperature of the hoop before inserting it into your nose.

Use a Little Lubricant

If the hoop still isn’t fitting as snugly as you’d like, you may want to try using a little lubricant. Water-based lubricants such as KY Jelly or Astroglide are good options. Just apply a small amount to the end of the hoop and slide it through the piercing. This can help reduce the friction and make it easier to insert the hoop.

Conclusion

Making sure your nose hoop fits snugly doesn’t have to be difficult. By following these simple steps—measuring your piercing, choosing the right size hoop, cleaning the piercing site properly, inserting the hoop slowly, warming the hoop before insertion, and using a little lubricant—you can ensure that your nose hoop fits comfortably and securely. With these tips and guidelines, you can enjoy your new nose hoop without any discomfort.